Air Data Support Equipment | Raptor Scientific

Pitot Static Adapters and Kits

Nia Carignan — Tue, 04 May 2021 20:28:06 +0000

Pitot Static Adapters and Air Data Accessories Kits

Pitot Static Adaptors and Accessories Kits for nearly all types of aircraft, including transport, fighter, trainer, helicopters, civilian, business jets and experimental. Manufactured to exacting standards by skilled technicians, these are unrivaled in their quality & simplicity of design.

Aircraft specific adapters are compatible with all manufacturers Pitot Static and Air Data Test Sets
Consistent product quality, uniformly tested and manufactured in a ISO 9001:2015 facility
Off-the-Shelf and custom adapters, probes and kits available
Custom length hoses sets to meet nearly any requirement
Send us your specific requirements for more information

The post Pitot Static Adapters and Kits appeared first on Raptor Scientific.

Vacuum Pressure Unit

Nia Carignan — Tue, 04 May 2021 23:28:00 +0000

The Vacuum Pressure unit provides clean, dry, filtered pressure and vacuum in a compact and rack mountable form factor. The lightweight unit produces low noise and the dry diaphragm pump provides oil-free use with a 4,500 hour maintenance interval. Two (2) 8 ft hoses are provided, one for Pressure and one for Vacuum.

Clean, dry filtered and regulated pressure source
Dry Diaphragm Pump provides oil-less operation
Lightweight, compact 19″ rack-mount form factor
Pressure Connection: 37° AN4 on Rear Panel
Vacuum Connection: 37° AN6 on Rear Panel

The post Vacuum Pressure Unit appeared first on Raptor Scientific.

Universal and Fixed Output Power Supplies

Nia Carignan — Wed, 05 May 2021 00:24:54 +0000

Universal and Fixed Output Power Supplies

Our power supplies deliver clean, regulated AC power in a 3.5” high bench top or optional rackmount unit. The TVCS-PS-1350 model has a fixed output of 115V 400Hz Single phase, ideal for test equipment including the TTU-205 Test Sets. The TVCS-PS-1351 model has a variable voltage output with selectable frequency (50/60/400 Hz) for testing of a variety of test equipment including the TTU-205 and other air data test sets.

P/N: TVCS-PS-1350 (115 VAC input, 115V 400Hz fixed output) NSN: 6130-01-645-8882
provides a fixed 115 VAC, 400Hz, Single Phase power for TTU-205 and other test equipment
P/N: TVCS-PS-1351 (115 VAC input, variable output)
provides a variable output voltage with selectable frequency (50/60/400 Hz)
P/N: TVCS-PF-1350 (115-230 VAC input, 115V 400Hz fixed output)
provides a fixed 115 VAC, 400Hz, Single Phase power for TTU-205 and other test equipment
P/N: TVCS-PF-1351 (115-230 VAC input, variable output)
provides a variable output voltage with selectable frequency (50/60/400 Hz)
Rackmount kits available, add a “R” to the part number when requesting

The post Universal and Fixed Output Power Supplies appeared first on Raptor Scientific.

Calibrator Vacuum Source

Nia Carignan — Tue, 04 May 2021 23:34:53 +0000

Calibrator Vacuum Source

Testvonics offers an innovative, compact, high-performance, oil-free vacuum pump that is suitable for a wide variety of applications. The pump employs an innovative hermetic design in which the motor and bearings are outside the vacuum space, allowing full isolation of all pumped gases. Delivering a robust pumping speed of 60 liters/minute and a very low base pressure of less than 250 milliTorr, it is the highest-performing dry pump in its class. The pump places little additional burden on system utilities and is even suitable for use inside cabinet enclosures.

Small footprint, low weight, and low power requirements
Low noise and vibration and weighs only 21 lbs
8ft Vacuum Source Hose included with each pump
115 VAC 50-60 Hz Model , P/N: ADC-2500-VAC-115
NSN: 4310-01-653-2521
220 VAC 50-60 Hz Model , P/N: ADC-2500-VAC-230

The post Calibrator Vacuum Source appeared first on Raptor Scientific.

Pitot Static Breakout Box (PSBB)

Nia Carignan — Wed, 05 May 2021 00:14:01 +0000

Pitot Static Breakout Box

The Pitot Static Breakout Box is a derivative of our Line Switching Unit (LSU) Series. The assembly includes a multi-port distribution unit which provides Pitot and Static outputs from one channel of Pitot and Static controlled outputs. The LSU distributes pitot static supplies for the external services and connection of hose assemblies for testing of aircraft Pitot and Static ports for various aircraft. The lightweight unit is housed in a highly durable and easy to maneuver case. Allows a single Pitot or Static input to distribute 4 Pitot Outputs and 8 Static Outputs

For C-17 Aircraft: P/N: TVCS-LSU-C17 NSN: 4920-01-530-0158 replaces P/N: 17G573809-1
includes LSU with four (4) Pitot / eight (8) Static outputs, four (4) 30ft Pitot Hoses, eight (8) 30ft Static hoses, and two hose storage bags
Features Red (Static) and Blue (Pitot) Color Coded Ports & Shutoff Valves
Custom configurations are available per customer requirement

The post Pitot Static Breakout Box (PSBB) appeared first on Raptor Scientific.

TTU-205J Retrofit Kit

Nia Carignan — Tue, 04 May 2021 23:54:13 +0000

With the TTU-205J Retrofit Kit, users can upgrade most TTU-205 models to the J configuration. This increases reliability and provides automated calibration capability using an ADC Series air data calibrator. Several cost benefit analysis have shown this upgrade can save up to 12 hours of test and calibration. The upgrade can be installed into any TTU-205D, TTU-205F, TTU-205G or TTU-205H test set in about 45 minutes. Once the installation is successfully installed, then initialized – the test set then becomes a TTU-205J.

Upgrade TTU-205/D, TTU-205/F, TTU-205/G, TTU-205/H, TTU-205S/S & FLMTS testers
RVSM Accuracy, improved test consistency and reduction in turn-around times
Extends operational life of assets, saving on new acquisition costs
P/N: TVCS-5200 TTU-205/J Retrofit Kit
P/N: TVCS-5001 A2 TTU-205J PCA, NSN: 5998-01-509-8040
P/N: TVCS-5101 A1 Enhanced I/O PCA, NSN: 5998-01-515-9821

The post TTU-205J Retrofit Kit appeared first on Raptor Scientific.

ADTS-3250 Pitot Static Test Set

Nia Carignan — Fri, 31 Mar 2023 15:43:23 +0000

Testvonics’s newest ADTS is based on our rugged, proven, and reliable ADTS-3350 series. It has a smaller, lighter form factor with lower rates and ranges for the commercial market.

The ADTS-3250 is a portable, high-precision, dual-channel pitot static test set designed to calibrate, test and troubleshoot aircraft pitot static systems and air data instrumentation. The ADTS can be used to test nearly all types of commercial aircraft and meets requirements for RVSM testing. The test set base model is a two-channel system –
upgrade to the three-channel model for testing Angle of Attack (AoA).

The 7.0” touchscreen handheld Remote Control Unit can be operated both wirelessly using built-in WiFi direct or hardwired to the test set using the included cable. The intuitive graphical user interface is designed to virtually eliminate the operator’s learning curve.

Aircraft Pre-Select allows the operator to select pre-loaded aircraft profiles. Once selected, the profile limits the ranges and rates to the aircraft under test. Each aircraft profile can store a virtually unlimited amount of Test Sequences. These sequences can be programmed to perform semi-automated tests based on job guides or technical orders. This provides improved test consistency while decreasing testing times. Profiles and test sequences can be created and/or edited using the included Profile Builder software.

The remote unit allows the operator the ability to perform aircraft checks and control the test set directly from the cockpit. The WiFi connection provides greater range over Bluetooth systems.

The ADTS can be calibrated automatically using Raptor Scientific ADC Series Air Data Calibrators. Corrections are automated and require no mechanical adjustments. The transducers have been proven to hold their accuracy for a minimum period of one (1) year.

The ADTS-3250 will be offered with a standard 2-year warranty, a 1-year calibration included, 48-hour guaranteed turnaround calibration services, free software updates as well as a loaner program to reduce downtime.

The post ADTS-3250 Pitot Static Test Set appeared first on Raptor Scientific.

ADC-2500V3 Air Data Calibrator

Nia Carignan — Fri, 09 Apr 2021 17:12:28 +0000

The ADC-2500V3 Air Data Calibrator is a high accuracy air data calibrator. The calibrator is capable of controlling and measuring Pitot, Static, Altitude and Airspeed pressures with the highest degree of accuracy. The control and measurement ranges and accuracies of the calibrator meet and/or exceed requirements for both commercial and military applications. The ADC-2500V3 is approved and actively used by Air Force Metrology and Calibration (AFMETCAL) Program, US Navy METCAL, more than 30 Foreign Military countries and commercial organizations worldwide.

Model No. ADC-2500V3
NSN: 6695-01-686-5413
High Precision Air Data Standard with intuitive Graphical User Interface
Capable of calibrating Pitot Static test sets manufactured by Barfield, Laversab, DMA Aero, GE Druck and others
Automated test & calibration software for Kollsman / TestVonics TTU-205J, GE Druck ADTS 405F, CME ADTS 415F, TestVonics ADTS-3350 and ADTS-3300JS models
Interfaces: RS-232, IEEE-488.2, TTU-205J, VGA, USB, Ethernet

The post ADC-2500V3 Air Data Calibrator appeared first on Raptor Scientific.

Precision Extender Board

Nia Carignan — Thu, 06 May 2021 20:01:35 +0000

Precision Extender Board

The Precision Trim Extender Board makes troubleshooting and adjustments on the TTU-205 quick and easy. The extender board eliminates the need for oscilloscopes and digital voltmeters. The PCA has an advanced diagnostic tool, allowing technicians to monitor valve states, power supply voltages, transducer frequency outputs, and a number of other analog and/or digital signals. Additional features include:

R-11 switch provides adjustment for fast transducer heater warm-up
R-37 switch provides adjustment for servo gain control
LED’s allow the user to quickly diagnose and troubleshoot test set issues
Digital display provides for quick and easy adjustment of the R-11 & R-37 pots
Part No. TVCS-6000-8

The post Precision Extender Board appeared first on Raptor Scientific.

ADC-2550V3 Air Data Calibrator

Nia Carignan — Sun, 18 Feb 2024 17:18:01 +0000

The ADC-2550V3 is a high-accuracy air data management system capable of controlling and measuring Altitude and Airspeed pressures to the highest degree of accuracy. The control and measurement range of the test system meets or exceeds most requirements for commercial and military test applications.

The ADC utilizes two digi-quartz absolute pressure transducers which provide unmatched accuracy and long-term stability. An expansive 10.4-inch glass PCAP touchscreen display allows the operator control the calibrator directly from the front panel. The intuitive graphical user interface features easily accessible modes of operation, including: Measure, Control, Leak Test, Test Program (capable of programming test sequences), Remote and Calibration. The ADC features several interfaces, including RS-232, IEEE-488.2 (for remote operation), VGA, USB2.0 (3x) and RJ-45.

The ADC is designed with hardware and software features for maximum protection to the operator and unit under test (UUT). The calibrator features input pressure regulation, over-range, over-limit and over-pressurization protection. Micro-porous filters and screening prevent debris from contaminating the system. The calibrator is equipped with pressure relief valves to protect the pneumatic system components and the UUT from damage. In the event that the calibrator loses power, internal vent valves and a front panel manual vent can be used to safely vent to ambient. Test Program mode allows the operator to create a virtually unlimited number of test routines for semi-automated testing and report generation, saving time and providing improved test consistency.

The ADC can be calibrated using a Primary Pressure Standard that will cover the full range (ADCS601, Dead Weight, Schwien).

The post ADC-2550V3 Air Data Calibrator appeared first on Raptor Scientific.

Maintenance and Calibration Test Stand

Nia Carignan — Thu, 06 May 2021 19:42:57 +0000

TTU-205 Maintenance Stand

The Maintenance and Calibration Test Stand (MCTS) was designed specifically to assist maintainers when calibrating, troubleshooting, or repairing the TTU-205 and Flight Line Maintenance test sets. The MCTS features rotating mounting arms which are designed to securely lock the TTU-205 front panel. These arms allow the test set to be rotated a full 360° and lock in place every 45°.

For use with all TTU-205 models: C/E, D, F, G, G/E, H, J, S/S and FLMTS
Rotates 360° and locks incrementally every 45° for ease of access
Perfect for repair, overhaul and testing of TTU-205 units
Locking wheel design allows stand to be transported easily in any facility
Nationally Stock Listed under NSN: 4920-01-501-8095
P/N: TVCS-6000-2 – (formerly TVCS-ECC-6000-2 )

The post Maintenance and Calibration Test Stand appeared first on Raptor Scientific.

TTU-205 Precision Volume Tank

Nia Carignan — Thu, 06 May 2021 19:33:12 +0000

Precision Volume Tank (PVT)

The Precision Volume Tank (PVT) is used for functional, operational and accuracy testing of the TTU-205 as well as other manufacturers test sets. The PVT provides the capability to perform proper Altitude and Airspeed Rate testing. The PVT emulates volumes associated with the Aircraft Pitot-Static Systems. To ensure that the test set can adequately evacuate or pressurize these systems, it becomes necessary to simulate these volume conditions.

Proper simulation of Aircraft Pitot Static volumes for testing
Provides confidence test set can adequately evacuate or pressurize the UUT
For TTU-205, ADTS 405, ADTS 415 and other manufacturers pitot static test sets
Volume Tank P/N: TVCS-6000-3 | NSN: 4920-01-501-6218
Hose Set (optional) P/N: TVCS-6000-3-1 | NSN: 4920-01-662-7644

The post TTU-205 Precision Volume Tank appeared first on Raptor Scientific.

ADCTS-1000 Series

Nia Carignan — Mon, 19 Apr 2021 16:54:43 +0000

Air Data Calibration Test Systems (ADCTS)

The Air Data Calibration Test System (ADCTS) is high precision advanced Secondary Air Data Controller-Monitor system. The ADCTS-1000 Series is a self-contained maneuverable rack-mounted air data management system. The ADCTS is used in calibration labs, avionics engineering and avionics/instrument shops. The system is designed to perform both manual or automated test and calibration routines for a variety of air data test equipment (ie. test sets, air data computers, altimeters, airspeed indicators and line replaceable units). The ADCTS can be configured for use in both commercial and military environments.

A Complete Air Data Calibration and Test Solution
ADCTS systems can be tailored to customer specific test requirements
Perform Automated Test, Calibration and Verifications on most air data test equipment
Standard configurations available to meet most customers needs

The post ADCTS-1000 Series appeared first on Raptor Scientific.

Air Data Distribution Manifolds

Nia Carignan — Tue, 04 May 2021 20:21:40 +0000

Pitot Static Line Switching Unit, Air Data Isolation / Distribution System

The Line Switching Unit (LSU) is a multi-port distribution unit which can provide multiple outputs from a single channel of controlled pressure. The LSU Series distributes pitot and static outputs to the external hose assemblies for testing of aircraft Pitot and Static ports. The lightweight unit is housed in a highly durable and easy to maneuver case with wheels, perfect for flightline use.

Allows a single Pitot or Static input to distribute to multiple outputs with shutoff valves
Features Red (Static) and Blue (Pitot) Color Coded Ports & Valves
Compatible with all manufacturers Pitot Static and Air Data Test Sets
P/N: TVCS-LSU-PT4-PS4 4 Pitot / 4 Static output NSN: 4920-01-661-5436
P/N: TVCS-LSU-PT6-PS6 6 Pitot / 6 Static output
P/N: TVCS-LSU-PT4-PS8 4 Pitot / 8 Static output (for AoA Angle of Attack probes)

The post Air Data Distribution Manifolds appeared first on Raptor Scientific.

ADC-2580SYS Air Data Calibrator

Richard Brinley — Wed, 08 May 2024 03:08:23 +0000

The ADC-2580SYS Air Data Calibrator is a high accuracy air data calibration system .The calibrator is capable of controlling and measuring Pitot, Static, Altitude and Airspeed pressures with the highest degree of accuracy. The control and measurement ranges and accuracies of the calibrator meet and/or exceed requirements for both commercial and military applications. It is integrated into a 6U ruggedized rackmount enclosure. Available with an optional vacuum source, vacuum source transit case, rear panel pressure regulator and pressure and vacuum hoses. The ADC-2580SYS is actively fielded by US Navy METCAL.

Model No. ADC-2580SYS
Includes ADC-2500V3 Air Data Calibrator NSN: 6695-01-686-5413
High Precision Air Data Standard with intuitive Graphical User Interface
Capable of calibrating Pitot Static test sets manufactured by Barfield, Laversab, DMA Aero, GE Druck and others
Automated test & calibration software for GE Druck ADTS 405F, CME ADTS 415F and other pitot static test sets
Interfaces: RS-232, IEEE-488.2, VGA, USB, Ethernet

The post ADC-2580SYS Air Data Calibrator appeared first on Raptor Scientific.

ADC-2575 Air Data Calibrator

Nia Carignan — Mon, 12 Apr 2021 11:33:30 +0000

The ADC-2575 Air Data Calibrator is a high accuracy pitot static calibrator. The calibrator is capable of controlling and measuring Altitude and Airspeed pressures with the highest degree of accuracy. The control and measurement range of the test system can meets or exceed requirements for both commercial and military applications. The ADC-2575 is a derivative of the ADC-2550 Series. It features a touchscreen interface, a mid range 23PSIA sensor. It is ideally suited for Automated Test Equipment (ATE) applications.

High Precision Air Data Calibration Standard
Ideally suited for testing Air Data / Pitot Static Instrumentation
Intuitive Graphical User Interface
RS-232, IEEE-488.2 VGA, USB and LAN (optional) Interfaces

The post ADC-2575 Air Data Calibrator appeared first on Raptor Scientific.

ADC-2550 Air Data Calibrator

Nia Carignan — Fri, 09 Apr 2021 17:30:37 +0000

ADC-2550 Air Data Calibrator is a high accuracy pitot static calibrator. The ADC-2550 is capable of controlling and measuring Altitude and Airspeed pressures with the highest degree of accuracy. The control and measurement range of the test system can meets or exceed requirements for both commercial and military applications – the ADC-2550 is Nationally Stock Listed. The ADC-2550 is a derivative of the ADC-2500 Series. It features a touchscreen interface, a mid range 23PSIA sensor. It is ideally suited for Automated Test Equipment (ATE) applications.

P/N: ADC-2550 | NSN: 6695-01-590-1161
High Precision Air Data Standard
Intuitive Graphical User Interface
USB, RJ-45, RS-232 Interfaces

The post ADC-2550 Air Data Calibrator appeared first on Raptor Scientific.

ADC-2555 Air Data Calibrator

Nia Carignan — Mon, 12 Apr 2021 11:22:06 +0000

The ADC-2555 Air Data Calibrator is a high-accuracy pitot static calibrator. The ADC-2555 is capable of controlling and measuring Altitude and Airspeed pressures with the highest degree of accuracy. The control and measurement range of the test system can meets or exceed requirements for both commercial and military applications. The ADC-2555 is a derivative of the ADC-2500 Series. It features a touchscreen interface, a mid range 23PSIA sensor and features Testvonics automated calibration software for the TTu-205J Pressure-Temperature Test Set.

P/N: ADC-2555 | NSN: 6640-01-653-2520
High Precision Dual Channel Air Data Standard
Intuitive Graphical User Interface
ECC Automated Calibration Software for TTU-205J
Interfaces: TTU-205J, USB (x2), RJ-45, RS-232

The post ADC-2555 Air Data Calibrator appeared first on Raptor Scientific.

ADC-2550C Air Data Calibrator

Nia Carignan — Mon, 12 Apr 2021 11:12:52 +0000

The ADC-2550C Air Data Calibrator is a high accuracy pitot static calibrator. The ADC-2550C is capable of controlling and measuring Altitude and Airspeed pressures with the highest degree of accuracy. The control and measurement range of the test system can meets or exceed requirements for both commercial and military applications – the ADC-2550C is Nationally Stock Listed. The ADC-2550 is a derivative of the ADC-2550 Series. It features a touchscreen interface, a mid range 23PSIA sensor. It is ideally suited for Automated Test Equipment (ATE) applications.

P/N: ADC-2550C | NSN: 4920-01-670-6976
High Precision Air Data Standard
Intuitive Graphical User Interface
USB, RJ-45, RS-232 Interfaces

The post ADC-2550C Air Data Calibrator appeared first on Raptor Scientific.

ADC-2522 & ADC-2522C Air Data Calibrator

Nia Carignan — Fri, 09 Apr 2021 17:40:54 +0000

The ADC-2522 is designed for rackmount use and features a large 10.4″ display with resistive touchscreen. The calibrator has the ability to emulate the Sperry / Honeywell ADT-222B IEEE-488-1975 communications. This allows the calibrator to be a plug and play replacement for the aging Honeywell ADT-222A, ADT-222B and ADT-222C Air Data Test Systems, without the expense in having to modify existing communication protocols or software.

P/N: ADC-2522 | NSN: 4920-01-105-0016
P/N: ADC-2522C (commercial version)
Fully qualified replacement for ADT-222B Model 4047505-422 and 4047505-421
High Precision Air Data Test Calibrator (ADT-C) used by USAF PMEL
Designed for ATE – features plug and play for Honeywell/Sperry emulation
Interfaces: RS-232, IEEE-488.2, Honeywell IEEE-488-1975 – (Note: ADC-2522C model also includes VGA, USB and Ethernet)

The post ADC-2522 & ADC-2522C Air Data Calibrator appeared first on Raptor Scientific.